...
You can do things like a hard power reset, query error logs, temperature states, etc.
Code Block |
---|
ESC R ESC r ESC R resets the system ESC ^ powers on the system cd system1 stop/start (supposed to turn power off/on, but doesn't seem to work) cd system1/console1 (probably could have done just "system1" here) reset/reset system1 (controls power) |
It is important to return to the linux OS login prompt when you are done
using the Baseboard Management Controller. You exit out of here and switch
the serial port back to Linux by typing 'exit', followed by Esc-Q
(escape, followed by Shift-q) Then press enter once.
...