Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
"""
Here's some general info that you may be interested in:
TI Master (TS for HPS):
1) 6 trigger input sources
2) prescalers on each input (in powers of 2 from 1, 2, ...65536)
3) can issue a random trigger
SSP:
1) Can supply 5 trigger signals to the TI Master
It would make sense to dedicate an SSP trigger output for each of the triggers you define in the table. This was the TS will be able to tag the events with unique trigger types that correspond directly to one of your trigger names...but if there are many more trigger definitions you want than we have trigger bits for we can mux so long as no more than 5 (or 6) are needed to run simultaneously, otherwise we may have to OR them together - you could use the SSP event data to let you know what trigger type happened in this case.
Thanks,
Ben
"""
Trigger name | Purpose | Prescale | Responsible | Comments |
---|---|---|---|---|
Random | Trigger debugging. | Yes | Name | |
Single beam electron (multiple triggers) | ECal & SVT calibration | Yes (set of triggers) | Name | Set of triggers to evenly distribute clusters across the ECal face. Require single cluster with beam energy (within resolution). |
Straight through single electrons | SVT no b-field run with upstream target. | No | Pelle | Only small region of ECal will be needed, defined by the limited track acceptance of the SVT in this run configuration. |
Pair OR trigger | Trigger efficiency studies using tag & probe techniques | Yes | Name | 'OR' of trigger in top and bottom halves. Would be good to have relatively flat energy spectrum. |
ep elastic | Trigger in ep elastic scattering | No | Name | |
Signal | Heavy photon discovery | No | Name |
In addition to the above beam electron trigger we can select beam electrons out of time with the signal trigger for calibration purposes.
Detailed requirements below.