EEL 2024

fibers A, B nominal config → see EEL setup

data flange vacuum side	lane	status	notes
(3,0)	8	ok
(3,1)	7	ok
(3,2)	6	ok
(2,0)	5	ok
(2,1)	4	ok
(2,2)		dead	fiber nominal config
(2,2)		ok	fiber swapped → dead on COB side

Swapping boards made L6b and L7b work and L5t and L5b stop working

data flange vacuum side	module	lane	status
(1,0)	L7t	8	ok
(1,1)	L6b	7	firmware doesn't boot
(1,2)	L7b	6	firmware doesn't boot
(0,0)	L5t	5	ok
(0,1)	L5t	4	ok

data flange vacuum side	module	lane	status
(1,0)	L34b	8	ok
(1,1)	L5b	7	ok
(1,2)	L34t	6	ok
(0,0)	L12b	5	interlocked digi low voltage
(0,1)	L12t	4	ok

Results: RN 21 (missing FEB 4, hybrid 3), RN 24 (missing FEB 1, hybrid 2)

data flange vacuum side	module	lane	FEB	notes
(1,0)	L7t	8	4	hybrid 0 not synced, one channel super hot; hybrid 3 has dead channels on the edge (detached wire bonds?)
(1,1)	L6t	7	3
(1,2)	L34t	6	2
(0,0)	L6b	5	1
(0,1)	L12t	4	0

Results: RN 25 and 26 (missing FEB 1, hybrid 2)

data flange vacuum side	module	lane	FEB
(1,0)	L6b	8	4
(1,1)	L5b	7	3
(1,2)	L5t	6	2
(0,0)	L12b	5	1
(0,1)	L34b	4	0

Results: RN 28 (a lot of switching stuff around here)

data flange vacuum side	module	lane	FEB
(1,0)	L6b	5	3
(1,1)	L5b	4	4
(1,2)	L5t	3	5
(0,0)	L34b	8	0
(0,1)	L12b	7	1

Search/Navigation: