- Jim's List:
- RDS- create figures for raised floor and penetrations
- Gate valves, gauges, and stands on MEC - creating list of updates for rev 02- can Igor start on anything?
- Rack layout models
- plop 3rd big rack and two existing racks into new rack layout model
- rev and remove from FEH model
- half rack - model no? ask Mitchell?- place in model
- review anchor dwg updates before thursday
- check Mirror vessel envelope in ESD- touched base with Will over email
- Meeting with Lasers on last Friday - MEch will take care of laser supports next to ATM and LIC - use laser charge code
- Jim will do modal - circle back with Dennis?
- ask Frank about mode change/link replacement- no mode change ever- so a replacement link will be ok- igor working on this? check this work.
- CXI - also touch on where gate valves should be for endstation entry- circle back
- BIO for diagnostic stand- still working
- Elena's List:
- Label the Section A top level that is not in use as obsolete so there's no confusion over which one to use
- vacuum sensors
- checked with Suyun about section A- found one overlap - recorded in BCS sheet
- check with Quentin- is he using correct fungible name?
- made a diagram for interim condition - shouldn't need any extra sensors - document in sensors engineering note
- Collimators
- adjusted PC3/BT2, added bellows, and updated in device spreadsheet - Rebecca to feed into raytrace
- check XRT support details now that we have Josh's updated model
- suggest mounting features- created slots - communicate changes to Josh
- bellows and drift strategy
- New adjacent CXI collimator on stand ?? - get updates from Matt D. -
- H4 Stand footing/H4 Bio
- check progress before Thursday
- igor is working on stand drawings
- igor is working on anchor drawing
- cursory BIO complete- need to work on actual
- Shielding Eng Note
- waiting on andrew
- highlight viton seal gate valves in vac schem for BCS folks
- interim conditions due to DXS installation delay
- find mystery rack in model or add as-built 3rd rack in model
- decide on how to organize models (such as racks etc)
- check Serges gate valve list
Overview
Content Tools