Attendees: Marc, Alex, Armin, Eliazar, Rebecca
- Matt thinks WFS spacing looks ok per 8/9 email - we will leave devices where they are
- Check XRT stopper clearance - there is an interference with the rack - we have a few options to review
- Igor will post screenshots by tomorrow
- Alex checked bases/versions of IPMs we have now - but we do have 3 chambers to reuse - these are all MFX type chambers
- Laser PRD coordination
- baseline requirement discussions - touch base with other lead scientists
- "up time" issue?
- backup?
- not all experiments require the laser so maybe certain issues are not as critical?
- near hall vs far hall issues
- we are also ready to design laser out-coupling when laser team has details/requirements available
- Facilities coordination - need to start discussing
- Detector Cooling
- Room Temperature control - can we control temperature locally at MODS table? easier? - first we need requirements
- JJ zooms/visit (27th) - questions about sticky slits
- Armin added LOC to functional diagram
- Elena is working on device list/mechanical schematic
- Alex will send us list of "old" names
- Detector - current plan? 2M +140k
- option: build an 16M shell with 4M modules?
- Alex will talk to David
- Angelo presentation?
- Costs? Options?
- 8M preferred - potential BCR (baseline change request)
- 2M may not be sufficient for most science cases
- Alex will create a summary of what we can achieve with each so we can do a cost/benefit analysis
- cost from Angelo?
- sparkpix better for smaller detector?
- need to talk about this a bit more
- Have we explored all funding sources?
- Alex might chat with Angelo to discuss options (speed/Area tradeoffs)
- option: build an 16M shell with 4M modules?