Attendees: Armin, Rebecca, Eric, Marc, Alex
Discussion:
- Waiting for WFS calcs from Matt Seaberg- He's on leave . return 7/19/2021
- His guess is that it's ok, but needs to do simulations
- Waiting for beam trajectory in KB mirror model - Received a new model # from Danny
- DSG-000018006
- Coordination with laser team is ongoing - underneath the raised floor is still leading concept (coord with Gerald Balanon at a later date )
- "throw the cat among the pigeons" - slightly wider table (4 feet) is being considered. can it be placed over the cxi beampipe (overlapping)
- we think this is ok so they will pursue
- custom (taller) Mirror box with extension collar (extra height hidden under floor)
- interference with "X"? Model validation...
- MFX/Laser ICD
- access to controls under diagnostics raft is going to be tricky - should we start coordinating with controls on new placement scheme?
- Need to evaluate if we have enough pumping to reach Level 1 pressures (we likely need to add pumps to new layout)- Rebecca to analyze
- Current gauges in MFX read:
- MFX-DG1-01 4.2e-09
- MFX-TFS-01 6.3e-09
- MFX-DG2-01 1.2e-08
- Current gauges in MFX read:
- RP meeting needs to be set up. - Mondays 1-2pm
- XRT Raytrace
- Dump ?
- CXI beam - hutch access still ok? mirror?
- CAD model clean up
- Transfocator – Alex to capture lessons learned - is there an email about this? (backlash)
- lenses loaded now: (per Alex from -z to +z) 500, 300, 250, 200,125, 62.5, 50, 50, 50
- Be is O-30-H
- units in microns
- IDCs
- Laser ICD ready to review
- other systems?
- 2nd pass through device list. (due in 3 weeks)
- ESDs
- For whole endstation or for particular subsystems?