**Sample alignment for shot
Target aligned 80-150um into the sample. (Then 80-150 micron away from optical laser interaction point!): FOV of Zyla using X4 objt gives ~200 um in X x 170 um in Y
**Shot procedure using script
Manually align sample by viewing on Zyla with beam mode at 1 Hz
1) op.pre_ref_talbot
run xx: Sample IN, Talbot OUT, SiT=10%, 20 img
run xx+1: Sample IN, Talbot IN, SiT=100%, 20 img
2) Optical shot
3)op.post_ref_talbot
run xx: White field, Talbot IN, SiT=100%, 20 img
run xx+1: White field, Talbot OUT, SiT=100%, 20 img
**Take images of sample
scanning in hexz (depth scan from ablator to rear side of sample) at fixed hexy, hexx
scanning in hexy (edge of cone to the other side of edge of cone) at fixed hexz, hexx
[Excerpt text for page tree]