28 October 2022:
- All detectors in this table are operational.
- YAG cameras verified:
- YAG0
- YAG1
- YAG3
- YAG4 (new, by Zyla)
20 October 2022: Zyla update.
- The camera was completely disconnected.
- All connections remade except for the other end of the DB15 cable (power...)
- Will look for this during housekeeping, searched multiple areas inn the hutch today.
19 October 2022: Resurvey status.
- Xray_imaging and SPL_TC_alignment gigEs operating.
- Verified operation of YAG1 and the SPL/Compressor gigEs (CompInNF/FF, CompOutNF/FF) not listed here.
- All 4 Opals and the ePix100a at XTCS are running.
- The Zyla is not appearing in the DAQ, will reset today.
The detector locations within the target chamber are marked on this diagram:
| Detector Number | Type | Function | In DAQ? | Notes | Cabled? | Running? | Comments |
|---|---|---|---|---|---|---|---|
Not usable at these intensities (>1019 ?) | |||||||
| 2 | ePix100a | XTCS | Yes | in-vac | Yes | Yes | ePix 1. |
| 4 | opal 2K | e- spectrometer | Yes | in-air | Yes | Yes | opal4_electron_spectrometer |
Not used for L-10008. | |||||||
| 6 | opal 2K | NF/FF | Yes | in-air | Yes | Yes | opal1_nf_ff Replaced 1K with 2K. |
| 7 | opal 4K | Imaging spot | Yes | in-air | Yes | Yes | opal2_focus_img |
| 8 | opal 4K | Time Tool | Yes | in-air | Yes | Yes | opal7_timetool |
| 9 | Zyla | MXI | Yes | in-air | Yes | Yes | zyla_xray_east Restart procedure at Zyla and iStar confluence page. Host is daq-mec-cam02. |
| 10 | gigE POE | replacement for GIGE4 | No | in-air, using old GIGE-MEC-CAM08 (Mako G-032B POE) | Yes | Yes | Now known as the beamline camera "XRay_Imaging" |
| 11 | gigE POE | SPL_TC_alignment | No | in-air, using old GIGE-MEC-CAM07 (Mako G-032B POE) | Yes | Yes | It does run well. From time to time, it 'freezes' such that we have to start/stop again. Nothing serious. The camera works well for its purpose! |
| |||||||
| 13 |
| ||||||
|