Procedure for installation

  1. Install sample holder hexapod (usually already installed)
  2. Install VISAR assembly platform (grey rectangular in the figure, make sure the front-round side touching the hexapod base)
  3. Install the limiting fingers (two green squares in the figure) on Q0 and Q1 assemblies 
  4. Push the breadboards of Q0 and Q1 such that it lines up with the back and side of VISAR breadboard.
  5. Bring Q2 assembly close to the Q1 assembly by setting a wedge block (red color block between Q1 and Q2 assembly in the figure). Follow the comment in the figure.
  6. Bring Q3 assembly close to the Q0 assembly and set it against hexapod base and VISAR assembly. (red color block between VISAR assembly and Q3 assembly in the figure).


  • No labels