You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Obtaining the source

Download the rave source from http://www.hepforge.org/downloads/rave.
Some basic instructions can also be found at http://projects.hepforge.org/rave/trac/wiki/UserGuide.

svn co http://svn.hepforge.org/rave/trunk rave_svn

Download the org.lcsim plugin from http://stop.itp.tuwien.ac.at/websvn/listing.php?repname=lcsimrave

Setup

The following assumes that your current shell is bash. If you are uncertain whether this is the case, type bash at the command prompt.

Building Rave at SLAC

You will need autotools to build Rave from source. The installation was successfully tested with

  • m4 (GNU M4) 1.4.9
  • libtool (GNU libtool) 1.5.22
  • autoconf (GNU Autoconf) 2.61
  • automake (GNU automake) 1.10

At SLAC these are already set up for you. Simply 

source /nfs/slac/g/lcd/mc/prj/scripts/setup-autotools.sh

Now change to the rave source directory.

cd rave_svn

If you don't have a configure script inside rave_svn, you will now have to type

./bootstrap

Configure the package to install to a custom location, and to pick up the right versions of CLHEP and BOOST.
At SLAC you should use the following setup to build with Java bindings.

source /nfs/slac/g/lcd/mc/prj/scripts/setup-java.sh
source /nfs/slac/g/lcd/mc/prj/scripts/setup-swig.sh
./configure --with-boost=/nfs/slac/g/lcd/mc/prj/sw/extern/boost/v1-33-1 \
            --with-clhep=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0 \
            --with-clhep_matrix-libpath=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0/lib \
            --with-clhep_vector-libpath=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0/lib \
            --disable-btagging \
            --prefix=<installation-dir>

If you don't want Java bindings, you can use this instead

./configure --with-boost=/nfs/slac/g/lcd/mc/prj/sw/extern/boost/v1-33-1 \
            --with-clhep=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0 \
            --with-clhep_matrix-libpath=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0/lib \
            --with-clhep_vector-libpath=/nfs/slac/g/lcd/mc/prj/sw/extern/clhep/2.0.3.0/lib \
            --disable-java
            --prefix=<installation-dir>

In either case, replace <installation-dir> with the path where you want to install Rave.

After configuration has finished you will get a status report which options Rave will be built with.
Build and install the package with

make && make install

Building Rave on Mac OS X

You will have to make sure that you have all the dependencies listed on the Rave web page installed on your system. These instructions assume that you have installed them using fink. If you have a different setup, please modify the paths accordingly.
Note that in order to install Java bindings, you will need a SWIG version that is newer than 1.3.20, which is currently distributed with fink.
The installation was tested with SWIG 1.3.31.
After downloading rave, change into the source directory with cd rave_svn and build the configure script with ./bootstrap.
If you have all dependencies installed, the following will configure the package properly:

 ./configure --with-boost=/sw \
             --prefix=/opt/RAVE \
             --with-clhep_matrix-libpath=/sw/lib \
             --with-clhep_vector-libpath=/sw/lib

make && make install

  • No labels