Shift Taker

There are two power supplies being used to power the top and bottom volumes of the Silicon VertexTracker (SVT).

To connect to their interfaces, first login into clon10 from a JLab machine with the user name clasrun:

> ssh clasrun@clon10

At this point, the EPICS GUI is started as follows:

> medm -x /usr/local/clas/devel/R3.14.12/support/xycomioc-1.0/medm/svt_trips.adl

Expert Only

In the case where the operation of the power supplies can not be done through EPICS, each power supply can be accessed directly through a terminal.  After login into clon10 (see above),