This page documents the configuration and cabling used by the Opal cameras in Run20 X523.
DAQ Configuration (mec.cnf)
| Camera Name | Type | Camedt Label | Host | Hardware | Flags/EVR |
|---|---|---|---|---|---|
| opal1_FF_NF | 2K | MecTargetChamber/0/Opal2000/2 | ioc-mec-cam05 | -g 0 -c 0 | su / 1,2 |
| opal2_focus_img | 4K | MecTargetChamber/0/Opal4000/2 | ioc-mec-cam03 | -g 0 -c 1 | psu / 1,9 |
| opal3_thomson_parabola | 4K | MecTargetChamber/0/Opal4000/4 | ioc-mec-cam05 | -g 0 -c 1 | psu / 1,9 |
| opal4_electron_spectrometer | 2K | MecTargetChamber/0/Opal2000/3 | ioc-mec-cam03 | -g 0 -c 0 | psu / 1.9 |
| opal7_timetool | 4K | MecTargetChamber/0/Opal4000/3 | ioc-mec-cam04 | -g 0 -c 1 | su / 1,2 |
Patch Panels
R60 Fiber Patch Panels
| 1 | 2 | 3 | |
|---|---|---|---|
| A | To PR60 | To Mezz | To PR6015 - Slot 1 Note: #2 covered by electrical tape |
| B | To R64A42-S1 | *** Not fiber connectors *** | To PR6016 - S1 |
PR60 Fiber Patch Panels
| 1 | 2 | 3 | |
|---|---|---|---|
| A | To R6032-S3 | R62 EL44 | R62E44S3 |
| B | To R6032-S3 Note: #2 covered by electrical tape | *** Quads *** | *** Empty *** |
From hosts to patch panel
| Host | Card | Connection to R60 Patch Panel | Connection to PR60 Patch Panel | Camera |
|---|---|---|---|---|
| ioc-mec-cam03 | Left (-c 1) | A3 #4 | opal2_focus_img | |
| ioc-mec-cam03 | Right (-c 0) | A1 #1 | opal4_electron_spectrometer | |
| ioc-mec-cam04 | Left (-c 0) | A1 #4 | opal7_time_tool | |
| ioc-mec-cam04 | Right (-c 1) | B3 #1 | ||
| ioc-mec-cam05 | Left (-c 0) | A3 #6 | B1 #4 | opal1_FF_NF |
| ioc-mec-cam05 | Right (-c 1) | A3 #1 | B1 #1 | opal3_thomson_parabola |
PR60
From cameras to patch panel
| Camera | Patch Panel |
|---|---|
| opal1_FF_NF | B1 #1 |
| opal2_focus_image | B1 #6 |
| opal3_thomson_parabola | B1 #4 |
| opal4_electron_spectrometer | A1 #1 |
| opal7_timetool |