Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Introduction
This refers to updating geometry for the following detectors:
Detector Description
See this page for general information.
The geometry is built in the detector converter as specified by input from the compact.xml file. Depending on the detector there is more of less information in the compact.xml. If you want to change some aspects of the geometry that is not available in the compact description please contact the experts.
Alignment constants
The compact contains a set of <millepede_constant name=XXXXX value=Y> which is read in and applied to the nominal setting of the geometry. These constants can be updated by hand or created from a Millepede output file.
Definition of the millepede constants
The name of an alignment constant "ABCDE" is described below for the Test Run geometry
Letter | Allowed values | Meaning |
---|---|---|
A | 0-1 | 0: TOP, 1:BOTTOM |
B | 0-2 | 0: sensor translation, 1: sensor rotation, 2: support plate |
C | ||
D | ||
E |