Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). Once that's done, log in as root into dpm7 and kill the rceServer (use ps to find the process ID). The firmware can then be loaded onto a FEB as follows:
cd /mnt/host/daq ./bin/xPromLoadRceNew <FebFpga> /path_to_images/Feb_<version>.mcs 1
Connect the JTAG dongle to the JTAG connector on the flange that corresponds a to the specific FEB you want to flash.
Open vivado.
In hardware manager, there's a green bar at the top under the toolbar, it should say "No hardware target is open."
Next to that "Open (new hardware) Target"
Connect to "local server". (=> says "connecting to the server")
New window showed up, "Open New Hardware target" looks like we don't change anything there? It shows hardware target and hardware devices (one each)
Top one should be xilinx_tcf, underneath "xc7a..." and underneath that "XAD"
Right click on "xc7a", select "Add Configuration Memory Device"
Then in the search box, type "28f00ap30t", it should filter down to a single item
Go to "Program Configuration..."
Choose the configuration file or "image" that you want to flash with. Should be a .mcs file.
Flash FPGA Instructions
In hardware manager, there's a green bar at the top under the toolbar, it should say "No hardware target is open."
Next to that "Open (new hardware) Target"
Connect to "local server". (=> says "connecting to the server")
New window showed up, "Open New Hardware target" looks like we don't change anything there? It shows hardware target and hardware devices (one each)
In the device tree, top one should be xilinx_tcf, underneath "xc7a..." and underneath that "XADC"
Right click on "xc7a", then "Program Device", leave "Debug probes file:" blank
Hit prgro
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). The Data DPM firmware can be loaded as follows:
cd /usr/clas12/release/0.2/slac_svt/svtdaq/daq ./rceScripts/set_image_data.sh /mnt/home/rherbst/svt_firmware/projects/DataDpm/images/DataDpm_<version>
Begin by logging into clondaq3 and updating the SVT firmware repo (/home/rherbst/svt_firmware/). The Control DPM firmware can be loaded as follows:
cd /usr/clas12/release/0.2/slac_svt/svtdaq/daq ./rceScripts/set_image_control.sh /mnt/home/rherbst/svt_firmware/projects/ControlDpm/images/ControlDpm_<version>