Confluence will be unusable 23-July-2024 at 06:00 due to a Crowd upgrade.
Requirements
Requirement | ePixUHR | SparkPix-S | SparkPix-ED |
---|---|---|---|
frame rate | 100kfps | 1Mfps | 1Mfps |
Power supplies | 2.5V Analog 1.3V (AS/DS/IO) | 2.5V Analog 1.3V (AS/DS/IO) 0.6V (Current sink!) | 1.2V (AS/DS/IO) |
Power for each supply | ePixUHR - 35 kHz | SparkPix-S: supply/ground and power consumption | t.b.d. |
Number of GT IOs per ASIC | 10 (outputs) | 10 (outputs) 1 clock in | t.b.d |
Expected I/O speed | 4.2Gb/s | 4.2Gb/s | 10 Gb/s |
Total data bandwidth | 42 Gbit/s | 38 Gbit/s | |
System level
Requirement | Parameters | ||
---|---|---|---|
Power supply | 24V consistent with the HR detector | ||
Mechanical size | We would like to match the ePixHRM board dimensions to reuse cooling Side entrance detector
| ||
Digital board | 2.56x5.265" | ||
Power and communication | 2.56x5.240" | ||
Carrier | 2.56x1.95 | Can we do it smaller? What is the minimum amount of components that need to leave in this board | |
System level power requirements for carrier (what are the specs for the voltage regulator and what is the number of regulators per power)
Requirement | Parameters | |
---|---|---|
2.5V | ||
1.2V | ||
0.6V |
Notes: