You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

  • Default "accelerator" is loaded at startup.
    If you want to load a test model, Use Accelerator->Load Accelerator...
  • Accelerator->Sequences is in fact really for automatic calculation of bump knobs
  • to create a knob, just do the following:
    Optionally, create a group.
    Create a knob
    Add devices:
  • Do this "by hand" if you know the PV. Eg YCOR:IN20:492:BDES
  • Do this by "drilldown" (which uses physics name). In the Editor:
  • Select a model sequence: Eg BXG TO BX01. Note that sequences are in alphabetical order. That is on the fix list.
  • Select a device "type". Note that the type names given are:
    1) SNS type names, which themselves use >1 name eg hcorr == dch == horrzcorr => X correctors.
    2) and also flattened hierarchy of types, eg type "dipole" includes hcorr and vcorr.
  • Select a device name, by "physics name".
  • Select FieldSet (not FieldRB). (issue: FieldRB should not be offered).
    Or calculate bump knobs
  • Select a section of contiguous sequence of sections (a "combo sequence") Accelerator->Sequences
    BXG TO BX01 - BX01 to BX02 works.
  • Knobs->
    Unknown macro: {Make Horizontal Bumps | Make vertical bumps}
    Make Horizontal Bumps (make Vertical Doesn't work!)
    For Horizontal Bumps:
  • Design Offset 3 (default) magnets - works (4 magnet doesn't work!)
  • Design Angle 5 (default) magnets - works
  • Live Offset 3 - works
  • Live Angle 5 works - works
    For Vertical Bumps, select sections BXG to BX01 - QM15 to FV2
  • Design Offset 3 (default) magnets - works, but they're mostly SLC magnets.
  • No labels