2.5.1
These are instructions for building APE 2.5.1 for the various supported OSes.
redhat4-i686-32bit
These instructions should be performed as the glastrm user on a machine running rhel4 in 32bit mode (glastlnx14 as of this writing).
- Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape
- Unzip and Untar the file ape-2.5.1-src.tar.gz
- Change directory to ape-2.5.1
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/ape/2.5.1/gcc34
- Execute make
- Execute make install
- Leave and erase the ape-2.5.1 directory
redhat4-x86_64-64bit
These instructions should be performed as the glastrm user on a machine running rhel4 in 64bit mode (noric13 as of this writing).
- Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/ape
- Unzip and Untar the file ape-2.5.1-src.tar.gz
- Change directory to ape-2.5.1
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit/ape/2.5.1/gcc34
- Execute make
- Execute make install
- Leave and erase the ape-2.5.1 directory
redhat3-i686-32bit
These instructions should be performed as the glastrm user on a machine running rhel3 in 32bit mode (noric02 as of this writing).
- Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit/ape
- Unzip and Untar the file ape-2.5.1-src.tar.gz
- Change directory to ape-2.5.1
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit/ape/2.5.1/gcc32
- Execute make
- Execute make install
- Leave and erase the ape-2.5.1 directory
leopard-i386-32bit
These instructions should be performed as the glastrm user on a machine running leopard in 32bit mode (bldmac02 as of this writing).
- Obtain APE 2.5.1 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
- Unzip and Untar the file ape-2.5.1-src.tar.gz
- Change directory to ape-2.5.1
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.5.1/gcc40
- Execute make
- Execute make install
- Leave and erase the ape-2.5.1 directory
2.3-gl1
These are instructions for building APE 2.3-gl1 for the various OSes supported.
leopard-i386-32bit
These instructions should be performed as the glastrm user on a machine running leopard (bldmac02 as of this writing).
- Obtain a APE 2.3 source code from James Peachey and save to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape if it doesn't already exist.
- Change directory to /afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape
- Unzip and Untar the file ape-v2r3-src.tar.gz
- Change directory to ape
- Execute ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/leopard-i386-32bit/ape/2.3-gl1/gcc40
- Execute make
- Execute make install
- Leave and erase the ape directory