Introduction
XTC Explorer is a GUI-based tool to explore interactively the XTC data files.
Data is extracted using the LCLS framework pyana or psana.
This application is implemented as a Python GUI which generates configuration file for pyana or psana and then allows to launch it.
GUI is implemented on PyQt,
visualization of data uses matplotlib, data processing algorithms are accelerated by NumPy and SciPy libraries.
Based on selections made in the GUI, xtcexplorer writes out pyana configuration files with names xb_pyana_XXXX.cfg, where XXXX is a random four-digit number. You can use them to run pyana directly from the command line. But they accumulate, so you might want to remove these regularly...
Naming conventions:
- project name: XTC Explorer
- package name in the offline software releases: XtcExplorer
- executable name: xtcexplorer
Manual: XTC Explorer
Authors:
- Ingrid Ofter - implemented everything for pyana
- Joseph Barrera - add option to run python modules on psana
- Andy Salnikov - latest maintenance
Latest tags:
2012-Aug-20 ofte V00-01-37
...
2013-Mar-14 salnikov V00-03-00
This tutorial shows how to set up environment, start xtcexplorer, explore content of the xtc file,
interactively create/edit configuration file for pyana/psana, run it interactively and in the command line, etc.
Set up environment
- See for details Analysis Workbook. Account Setup
- Log onto any machine of the interactive pools psananeh or psanafeh:
ssh -Y pslogin ssh psananeh or ssh psanafeh
- Once per session execute one of the following scripts
- for bash shell:
. /reg/g/psdm/etc/sit_env.sh
- or for csh shell:
source /reg/g/psdm/etc/sit_env.csh
- for bash shell:
- You should always run this application from your own release working directory:
At this point you are ready to go.
newrel ana-current my_tutorial_release; cd my_tutorial_release; sit_setup;
Optional: if something need to be changed in code, check out the latest version of package and "compile":
addpkg XtcExplorer HEAD scons
Exercise 1: Start xtcexplorer and select the XTC file
Application GUI can be started by the command
xtcexplorer
To proceed the xtc file name should be pointed using one of four methods:
- use command line parameter
xtcexplorer /reg/d/psdm/XPP/xpptut13/xtc/e308-r0008-*.xtc or xtcexplorer /reg/d/psdm/SXR/sxrtut13/xtc/e306-r0366-*.xtc
- use Instrument-Experiment-Run number-Load buttons in GUI
- use file browser
- type-in the file name
Once a file or more has been connected, another GUI will pop up (possibly after a short delay while the file(s) content is being investigated). This GUI displays information about the file content and help with further processing of the data in pyana.
Exercise 2: Explore XTC file content and make configuration file
In the Psana Control Center window
- set desired parameters in section General Settings
- in the left panel check detectors which you want to monitor, for example
EBeam
FEEGasDetEnergy
XppGon-0|Cspad2x2-1In case of selection
Epics Process Variables
separate window Available Epics PVs will pop up. Desired PVs need to be checked.
Click on Write configuration to file button.
After that the configuration file with name xb_pyana_XXXX.cfg is ready and can be edited clicking on Edit configuration to file or executed
- click on button Run pyana or Run psana and confirm in the pop-up box that you want to run command line like
Ok
pyana -c xb_pyana_XXXX.cfg
and enjoy observing your data in plots
Exercise 3: Run pyana with existing configuration file from command line
Use ls
command, select one of existing configuration files created by the xtcexplorer in current directory and run psana/pyana by the command line:
pyana -c xb_pyana_XXXX.cfg
observe the same results as in Exercise 2.
References
XTC Explorer
HDF5 Explorer
Pyana User Manual
Migration from pyana to psana