• Created by Unknown User (phansson), last modified on May 28, 2015

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

DescriptionStatusWhen 
Fix the 125 vs 250MHz phase lock: either by storing it in the data or fixing the phase itself.   
Understand FEBs getting out of sync (bad link events?)   
Avoid bad links on the flange; maybe try spare flange   
Add variable latency between triggers to study noise vs time b/w triggers   
Fix bad termination of the string for calibration "compact config bank" in the ROL   
50 kHz rate: TI busyImplementation exists. Need to test.  
50kHz rate: go to 4 or 5Gbit links?   
Data format optimizationImplementation that reduce overhead exists. Needs testing.  
Hybrid power status is not correct when FEBs are not powered.
Can add a check to epics that 'ANDs' with control IOC status to make them yellow?		Not started.  
Add SEU monitor to FEB firmware   
Create SVT DAQ test environment at SLAC (TI crate + RCE crate + FEB + Hybrids)   
Fine-grained trigger delay (8 ns steps)Based on my current understanding of the trigger clocking, this is not possible.  
Do we know why some hybrids (L6t stereo positron, others) had their latency change during runs?   

Use the actual heartbeat update each poll in XML node check

   
Update FEB power and daq map for monitoring with the switch we think is there.   

 

 

  • No labels