|
DHCP: Network SettingsThe protocols used by the 1756 Model PLC's and the Touch Panels are TCP/IP. DHCP is support in both devices. The touch panel has the following parameters:
The PLC has the same and:
|
Part I: Configuring IP Address for PLC using RSLINXStep 1: Open RSLINX Open RSLINX and configure driver to communicate with the PLC. Refer to How-to Download PLC Ladder Logic if you need help. Step 2: Open Properties Window Expand the device tree and right-click on the Ethernet module. Then click on the Module Configuration. Step 3: Configure the Ethernet Port Click on the Port Configuration tab and enter the necessary information and click OK. Part II: Configuring IP Address for PLC using RSLogix5000.Step 1: Open RSLogix5000 Open RSLogix5000 and the applicable ladder logic file. Then go online with the PLC. Refer to How-to Download PLC Ladder Logic if you need help. Step 2: Open the Properties Window Right-click on the Ethernet module and click on Properties. Step 3: Configure the Ethernet Port Click on the Port Configuration tab and enter the necessary information. Click Ok. Part III: Configuring IP Address for a PanelView PlusConfiguring the IP address for a touch panel is done directly on unit. Step 1: Configuration Screen Navigate to the Configuration screen. If the application is running, look for a button that says TCHPNL CONFIG. Step 2: Navigate to Settings
There are two directions you can go: Network Adapters and Device Name Step 3: Device Name
Step 4: Network Adapters From Step 2:
There are two items here to set: Name Servers and IP Address. Step 5: Name Servers
Step 6: IP Address From Step 4:
Step 6: Reboot
|