^
This is a list of the PVs that will be available to Matlab applications for data acquisition, and some device control. This list currently includes only devices in the injection area. See the page [ Injection Area Device Names|IN20DeviceNames] to relate these EPICS PV names to the corresponding MAD name of a device, and its corresponding SLC name.
*Note: This is a work in progress *
The Controls group is currently developing the interfaces to these devices; PVs will be added, and the names, units, and ranges will change as the interfaces develop.
Klystron PVs
EPICS PV Name |
Purpose |
Units |
Range |
|||||||
---|---|---|---|---|---|---|---|---|---|---|
Klystron : Area : Position : Attribute |
|
|
|
|||||||
KLYS_LLRF:IN20:801:G_L0B_P |
RF Phase control |
Deg. |
|
|||||||
KLYS_LLRF:IN20:801:G_LOB_P_MON |
Readback; actual value of phase |
V |
|
|||||||
KLYS_LLRF:LI21:101:G_L1S_A |
RF Amplitude control |
% |
-5% to 5% |
|||||||
KLYS_LLRF:LI21:101:G_L1S_A_MON |
Readback; actual value of ampl |
V |
|
|||||||
KLYS_LLRF:LI21:101:G_L1S_P |
RF Phase control |
Deg. |
|
|||||||
KLYS_LLRF:LI21:101:G_L1S_P_MON |
Readback; actual value of phase |
Deg. |
|
Bunch Length Monitor PVs |
EPICS PV Name |
Purpose |
Units |
Range |
||
Bunch Length Monitor : Area : Position : Attribute |
|
|
|
|||||||
BLEN:LI21:265:WIDTH |
Width of pulse (bunch length) |
Fsec |
100.0 to 300.0 |
BPM PVs |
EPICS PV Name |
Purpose |
Units |
Range |
||
BPM : Area : Position : Attribute |
|
|
|
|||||||
BPMS:IN20:<position>:<attribute> position = 211, 235,371,425, 511,525, 581, 631, 651, 731, 771, 781, 925, 945, 981 |
|
|
|
|||||||
BPMS:LI21:<position>:<attribute> position = 131,161,201,233,278, 301,315,401, 501,601,701,801,901 |
|
|
|
|||||||
|
|
|
|
|||||||
Most commonly used Attributes: |
|
|
|
|||||||
BPMS:<area>:<position>X |
beam position in X |
Mm |
-3.0 to 3.0 |
|||||||
BPMS:<area>:<position>:Y |
beam position in Y |
Mm |
-3.0 to 3.0 |
|||||||
BPMS:<area><position>:TMIT |
Electron count, charge? |
|
1e10 to 3e10 |
|||||||
BPMS:<area>:<position>:XHST |
array of last 500 X measurements |
|
|
|||||||
BPMS:<area>:<position>:YHST |
array of last 500 Y measurements |
|
|
|||||||
BPMS:<area>:<position>:TMITHST |
array of last 500 TMIT measurements |
|
|
Toroid PVs |
EPICS PV Name |
Purpose |
Units |
Range |
||
Toroid : Area : Position : Attribute |
|
|
|
|||||||
TORO:IN20:215:TMIT position=215, 431, 791, 971 |
Electron count, charge? |
|
1e10 to 3e10 |
|||||||
TORO:LI21:205:TMIT position=205, 277 |
Electron count |
|
1e10 to 3e10 |
Wire PVs |
EPICS PV Name |
Purpose |
Units |
Range |
||
WIRE : Area : Position : Attribute |
|
|
|
|||||||
WIRE:IN20:531:<Attribute> Position=521, 561, 611, 741 |
|
|
|
|||||||
|
|
|
|
|||||||
Most commonly used Attributes: |
|
|
|
|||||||
WIRE:IN20:<Position>:YDATARAW |
Array of y measured raw data |
numeric |
|
|||||||
WIRE:IN20:<Position>:XDATARAW |
Array of x measured raw data |
numeric |
|
|||||||
WIRE:IN20:<Position>:UDATARAW |
Array of u measured raw data |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>DATA |
Plane arrays of processed data |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>SIGMA |
Plane calculated beam width |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>RMSERR |
Plane RMS error |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>FWHM |
Plane full width at half maximum height |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>MEAN |
Plane mean |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>ASYM |
Plane asymmetry |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>WIDTH |
Plane width |
numeric |
|
|||||||
WIRE:IN20:<Position>:<Y,X,U>AREA |
Plane area |
numeric |
|
OTR PVs |
EPICS PV Name |
Purpose |
Units |
Range |
||
OTR : Area : Position : Attribute |
|
|
|
|||||||
OTRS:IN20:<position>:<attribute> position = 466, 471, 541, 571, 621, 711, 991 |
|
|
|
|||||||
OTRS:LI20:<position>:<attribute> position = 237, 291 |
|
|
|
YAG PVs |
EPICS PV Name |
Purpose |
Units |
Range |
|
|
YAGS:IN20:<position>:<attribute> position = 211, 241, 351, 471, 841, 921, 995 | | | || ^