To use the Testbed with LICOS, create 4 terminal windows and name them VSC, SIU, EPU0, EPU1.

• VSC:

  xyplex lat-elf21 reboot cd "/nfs/slac/g/glast/online/VSC/sbc" < startup-mv2304-vsc.vx

• Python:

  from LICOS.scriptEngine.ScriptEngineConnector import ScriptEngineConnector p = ScriptEngineConnector('lat-elf21',None,None) p.start() p.bootSIU()

• SIU:

  cd /nfs/slac/g/glast/online/VSC xfmx xyplex siu.fmx --tag=rad750 --target=lat-elf23

• Python:

  p.mainFeedOn(siuId=1, pduId=0) p.ssr(1) p.powerOnEpuOnly(epuId=0)

  Wait 20 seconds

  p.bootEPU(epuId=0)

• EPU0:

  cd /nfs/slac/g/glast/online/VSC xfmx xyplex epu.fmx --tag=rad750 --target=lat-elf24

• Python

  p.powerOnEpuOnly(epuId=1)

  Wait 20 seconds

  p.bootEPU(epuId=1)

• EPU1:

  cd /nfs/slac/g/glast/online/VSC xfmx xyplex epu.fmx --tag=rad750 --target=lat-elf25

• To power on a TEM:

  p.powerOnTemOnly(temId=0, pduId=0)

• To power on CAL frontends:

  p.powerOnCalOnly(temId=0)

• To set the CAL bias voltage:

  p.setBiasVoltageCal(temId=0, biasVoltage=0x5800)

• To power on TKR frontends:

  p.powerOnTkrOnly(temId=0)

• To set the TKR bias voltage:

  p.setBiasVoltageTkr(temId=0, biasVoltage=0x54fe)

• To power on ACD free boards:

  p.powerOnAemOnly(pduId=0, supRed=0) p.powerOnFreeBoardOnly(freeId=0)

• Start the proxies and the scriptEngine:

  python $ONLINE_ROOT/LICOS/telemetry/DiagnosticProxy.py --config $ONLINE_ROOT/LICOS/start/vsc.cfg --vscip lat-elf21 [--logtime] [--noarchiver]

  python $ONLINE_ROOT/LICOS/telemetry/TelemetryProxy.py --config $ONLINE_ROOT/LICOS/start/vsc.cfg --vscip lat-elf21 [--logtime] [--noarchiver]

  python $ONLINE_ROOT/LICOS/science/ScienceProxy.py --config $ONLINE_ROOT/LICOS/start/vsc.cfg --vscip lat-elf21 [--logtime] [--noarchiver]

  $ONLINE_ROOT/LICOS/start/scriptEngine.sh --config $ONLINE_ROOT/LICOS/start/scriptEngine.cfg --vscConfig $ONLINE_ROOT/LICOS/start/vsc.cfg --server lat-elf21

• To use LEM command/response at SIU:

  ld < /afs/slac/g/glast/flight/ICS/binary/LEM/prod/mv2304/lem_cli/liblem_cli.o