use your browser to start with fastX3: https://fastx3.slac.stanford.edu:3300/session/
start a new session, and launch a desktop
right click the desktop, and start a terminal:
ssh to rddev111: ssh -Y rddev111:
start firefox with address: firefox http://localhost:5007/main_SP
If you need to work for the DAQ development, you can start firefox with http://localhost:5008/main_DAQRD
Choose the "Detector Power" Tag
There are 3 buttons for LV power cycle/on/off
You can read the LV power supply status with the Live-Camera
Choose the "Scan Control" Tag at first:
Click the "Start Scan" button, and waiting about ~10 sec for digital/analog scan
Some scan information, like scan number, scanType, and scan time are shown in text
The Occupancy map for the digital scan will show on the left.
firefox open http://localhost:5009/main_RCEAdm
go to your host-PC, git clone the YARR devel_python branch: https://gitlab.cern.ch/YARR/YARR/-/tree/devel_python
start bokeh server: <YOUR YARR PATH>/src/python/startServer.sh
run Cmd "ps -ef|grep bokeh" to get the bokeh process ID.
run Cmd "kill -9 <ID>" to keep the bokeh process.
go to your host-PC, and a working folder (your user folder, for example)
run Cmd:
1) python3 -m venv bokeh-env
2) source <your folder>/bokeh-env/bin/activate
3) (this is only needed for the first time) install the module: pip3 install bokeh matplotlib seaborn paho-mqtt
go to your host-PC,
change to admin account, root, for example
run cmd: service mosquitto start
reference: http://www.steves-internet-guide.com/install-mosquitto-linux/