Fibers were tested in fixed locations on the RTM. To ensure that things are working as expected from this table, they should be placed in the same locations on the RTM according to the 2021 mapping.
Fiber / RTM combination | Status |
---|---|
A | OK |
B | OK |
C | OK |
D | OK |
E | OK |
F | OK |
G | OK |
H | OK |
QA of Flange Board ↔ FE0Bs
FEB | FEB SN | Flange Board (HW) | Flange Channel | I At Boot (AnaN, AnaP, Digi) | I Mod ON | I Mod ON + Config | Ctrl Ch (dpm / ch) (1 is top cob) | Fiber (ctrl / Data) | jTag OK | Feb Address | Data Taking | Comment |
---|---|---|---|---|---|---|---|---|---|---|---|---|
L0-1t | 12 | 2 | 2 | 0.242 - 1.212 - 1.250 | 0.292 - 2.317 - 1.392 | 0.292 - 2.833 - 1.322 | 0 / 3 | D / H | Y | 0 | OK | |
L2-3t | 17 | 3 | 0 | 0.256 - 1.248 - 1.239 | 0.317 - 2.319 - 1.314 | 0.313 - 3.112 - 1.313 | 0 / 8 | D / H | Y | 2 | OK | |
L5t | 05 | 0 | 0 | 0.236 - 1.216 - 1.287 | 0.272 - 2.101 - 1.334 | 0.271 - 2.715 - 1.334 | 1 / 5 | A / E | Y | 6 | OK | |
L6t | 16 | 0 | 1 | 0.249 - 1.222 - 1.362 | 0.313 - 2.743 - 1.434 | 0.308 - 3.539 - 1.434 | 1 / 4 | A / E | Y | 8 | OK | |
L4b ( In EPICS is L4t) | 08 | 2 | 1 | 0.248 - 1.241 - 1.248 | 0 / 4 | C / G | Y | 5 | OK | Only 2 HV pins on one hybrid (instead of 4) | ||
L4t ( In EPICS is L4b) | 11 | 1 | 0 | 0.252 1.153 1.374 | 0.307 - 2.8755 - 1.448 | 0.304 - 3.564 - 1.449 | 1 / 8 | B / F | Y | 4 | OK | |
L5b | 20 | 1 | 1 | 0.246 - 1.169 - 1.243 | 0.306 - 2.242 - 1.346 | 0.302 - 3.063 - 1.321 | 1 / 7 | B / F | Y | 7 | OK | |
L6b | 04 | 1 | 2 | 0.248-1.199-1.278 | 0.307 - 2.705 -1.345 | 0.304 - 3.525 - 1.348 | 1 / 6 | B / F | Y | 9 | OK | |
L0-1b | 07 | 2 | 0 | 0.241 - 1.284 - 1.313 | 0.293 - 2.235 - 1.394 | 0.293 - 2.931 - 1.394 | 0 / 5 | C / G | Y | 1 | OK | |
L2-3b | 01 | 3 | 1 | 0.220 - 1.330 - 1.388 | 0.311 - 2.452 - 1.456 | 0.305 - 3.286 - 1.456 | 0 / 7 | D / H | Y | 3 | OK |
List of issues we observed during local data taking relative to the Back - End.
NOTICE!!! The dpm numbers in the daq map after 7 are off by one. Example: DataDpm[13] in the DAQ Map is hostname dpm14.
Server machines: clonfarm1, clon10new
TiCrate: hdel1
COBS: dpm0 : dpm6, dpm7, dtm1
dpm8 : dpm15, dpm15, dtm2
Connect to clonfarm1 as clasrun and change to bash shell
SVT software is installed in
/data/hps/slac_svt/ => diskless is exported to the cobs via nfs (server hosted on clonfarm1, v2) => daq is exported to the cobs via nfs. Has been compiled on DTM1 => server contains the current software installation |
On clonfarm1 start the rogue server
source /usr/clas12/release/1.4.0/slac_svt_new/anaconda3/etc/profile.d/conda.sh conda activate rogue_5.9.2 cd /data/hps/slac_svt/server/heavy-photon-daq/software/scripts/ python SvtCodaRun.py --local --env JLAB |
On clon10new start the dummy server
python SvtCodaDummy.py --local --env JLAB |
We are using conda release 1.4.0, installed in
/usr/clas12/release/1.4.0 |