Instructions to run baseline configuration testing on SCIPP cleanroom desktop
1. Connect module with proper power supply configuration (see elsewhere)
Do not apply HV
2. 'cd work'
3. 'source setup_daq.sh'
4. 'trackerGui &' opens testing user interface
5. In Tracker Control, select "Load Settings"Choose config file: 'heavy-photon-daq/config/baseline_config_L0.xml'
Configuration and State window will show APVs not synce
6. Click 'SoftReset' button in GUI to sync APVs
7. Under "Data File", click 'Browse' to create a save file
8. After creating save file, click 'Open'
9. Under "Run Control" section, check the following:
Run Rate: 100Hz
Run Count: 2000
10. Select "Run State:" drop down menu and click 'Running'
This will run the test and save the results to the Data File
11. To create root output from binary file
'makeHD -i <baseline_config_without_bin_ext> -r 1 -d 1 -f 1'
12. To analyze the root file
'anaHD.py -i <makeHD_output.root>