This is a step-by-step procedure to use the Nordson Robot in B33 to deposit SE4445 in the star pattern.
Turn dry-air valve counterclockwise ¼ turn.
There should be a hissing noise from the air flow.
This dry air is used to control EFD and height gauge. |
The ITkPixel account on the PC has the Janome Points software installed to control the robot.
The password is AtlasITkBox. For info about the itk-admin account contact Matthias Wittgen |
See picture for comparison:
Neha_2020Feb3_InnerRingx3.cpd
Meca Initialize
:
To execute the program hit Send C&T data
from the Robot menu.
Make sure that the Robot is set in |
Select Switch Run Mode in the Changing Mode
window from the Robot menu.
Select the program # to execute from the Robot command buttons. It will be displayed on the LED.
The program # is displayed on the right. |
Push the green start button.
At any moment if any issue to terminate push the RED button |
Teaching mode
in the Changing Mode
window from the Robot menu. Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.
|