Presentations

Build System Overview
SLAC Standard Firmware Library
HowTo Build System GIT
HowTo include and build Microblaze
GIT References:
- HowTo Build System GIT
- How to install and setup TortoiseGit for GitHub
  - https://git-for-windows.github.io/
  - Note: "git-for-windows" must be installed for running TortoiseGit
  - Recommend adding this to your TortoiseGit's global .gitconfig
    - [core]
    - autocrlf = false

Summary Table:

Green Fileed = Supported

Red Filled = Not Supported

Minor Version Number	1	1	1	3
	Vivado Support
Major Version Number	2014.x	2015.x	2016.x
Multiple IP core generation
PROM generation
ILA Debug generation
VCS script generation
Incremental Compile
Partial Configuration
Vivado HLS
System Generator
SDK				ESCORE-120

Note: We are not supporting any Vivado version before 2014.1

Note: Xilinx has dropped 32-bit support for version 2015.1 (or later). If you are building on a 32-bit Linux kernel, you will need to use 2014.4 (or earlier).

Note: We are only supporting "Incremental Compile" for version 2015.3 (or later) <http://www.xilinx.com/video/hardware/incremental-compile-updates-for-2015_3.html>

Note: We are only going to support SDK for Vivado 2015.4 (or later) because that was the version that we started to build SDK.

Vivado HLS

We don't support Vivado HLS for version 2014.2 because requires too many manual soft-links to be created for the library paths to make it work.

System Generator

Due to AR# 59236, we are not supporting System Generator before 2014.3
For 2015.3, there is a bug in System Generator exporting both RTL and .DCP. In both exporting types, System Generator hangs and never generates the output files. This was tested using both Matlab R2014b and R2015b