Rebooting an IOC from LCLSHOME In most cases, from the productin system it is best to use the lclshome interface to reboot an IOC.
|
Rebooting in IOC from iocConsole If you first need to see the state of the IOC, or you need to watch it reboot, then iocConsole gives you better insight. You need to have the proper permission for this option; you must be in the laci group. See Jingchen Zhou to have your login added. Note that in production, the iocegr and physics account have the proper permissions.
|
Rebooting by resetting the Wiener Crate When all else fails, you can try resetting the crate in which the IOC resides (keep in mind the entire crate will be reset). This is done by using the web interface for the crate:
|
Rebooting by telneting to your IOC If you are not able to use iocConsole you can telnet to your ioc as follows: telnet <nodename, or ip address> for rtems-4.7.1 For rtems-4.9.1 and greater |