Task | Done? | Who? | JIRAs |
---|---|---|---|
Conditions/Calibration DB | |||
setup @ JLAB | yes | Jeremy | |
read/writable from control room | yes | Jeremy | |
on/offline software integration | yes | Jeremy | |
check & load conditions (ECal/SVT) into db | yes | Nathan | |
Online Monitor | |||
EVIOtoLCIO converter working | yes | Jeremy | |
MonitoringApp functional & performant | yes | Jeremy | |
Monitoring Plots: ECAL | yes | Andrea | |
Monitoring Plots: SVT | almost | Omar | |
Monitoring Plots: Trigger | yes | Kyle | |
Monitoring Plots: Tracking | yes | Matt | |
DAQ GUI: Trigger | |||
load constants; reset system | yes | Kyle/Ben | |
monitor trigger state & performance | yes | Kyle/Ben | |
DAQ GUI: SVT | |||
load constants; reset system | N/A | Omar/Ryan | |
monitor SVT state | N/A | Omar/Ryan | |
Slow Controls | |||
HV/LV controls & alarms | yes | Hovanes | |
Strip charts for beam params | yes | Hovanes | |
GUIs for temperature & magnet controls | yes | Hovanes | |
GUIs for motor controls | yes | Hovanes | |
Scaler readout & monitoring | yes | Sergey | |
Data Storage & Bookkeeping | |||
data written gets transferred to perm storage | yes | Nathan | |
data insertion into catalog | in progress | Nathan | |
Documentation | |||
Manual/shifters instructions for online monitoring | yes | Jeremy & system experts | |
Manual/shifters instructions for slow controls | yes | Hovanes & system experts | |
Manual/shifters instructions for SVT GUI | N/A | Omar/Ryan | |
Manual/shifters instructions for Trigger GUI | Yes | Kyle/Ben |