Table of Contents |
The FACET facility is controlled by the VMS-based SCP control system, and EPICS controls for some systems. This is a basic FACET control system physics development guide.
confluence test area:
test
test2
The FACET EPICS control system resides on its own MCC-based private network, parallel to and separate from the LCLS network. The FACET servers that will be used for matlab work are:
The FACET and LCLS directory structures have a parallel naming convention:
To log into the FACET network from a linux terminal session:
To log into the FACET network from an OPI in MCC:
facethome is the toplevel display for the FACET accelerator. It is similar to lclshome, a grid showing all areas and subsystems, with clickability into the various displays.
To run facethome from a terminal session on the facet network (see above) enter:
To run facethome from a an MCC opi:
To run a SCP from a terminal session window:
To run a SCP from facethome:
Environment setup
After you log onto a Linux machine using the fphysics account, you'll need to customize the environment for matlab. Once Mike Z. has set up your user directory under fphysics as described in II. above, add these commands to your /home/fphysics/yourUserID/ENVS file, and they will be automatically invoked every time you log in. Note: All strings are case-sensitive.
Note: your_IP_address can be found after e.g. running ipconfig on Windows.
to start the full GUI version If you want to run applications only and/or do some basic scripting (recommended), typematlab
http://www.slac.stanford.edu/grp/cd/soft/aida/