You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

This page describes how to compile and run the RCE teststand software at SLAC and CERN. Checking out the packages from SLAC CVS requires a SLAC Unix login account. Required steps are identical for the SLAC and CERN environment unless otherwise mentioned.
Recommened hosts used in examples

 

SLAC

CERN

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="67fb676b-0bf6-4ed3-a7e0-36cfe737c4c0"><ac:plain-text-body><![CDATA[

[BUILD_HOST]

rddev101

pcphuat27

]]></ac:plain-text-body></ac:structured-macro>

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="2cdb57ae-1c39-4935-b07e-590e02093424"><ac:plain-text-body><![CDATA[

[XMD_HOST]

atca01

pcphuat27

]]></ac:plain-text-body></ac:structured-macro>

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="079c1c9b-ecd9-4b43-86df-9d70f8e056e0"><ac:plain-text-body><![CDATA[

[IPC_HOST]

atca01

lnxatd76

]]></ac:plain-text-body></ac:structured-macro>

<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="c6be5a1e-5ac9-476d-9e83-b433131f0b28"><ac:plain-text-body><![CDATA[

[RCE]

rce37

rce35?

]]></ac:plain-text-body></ac:structured-macro>
Setting the RCE development environment (C-Shell)
source  /reg/g/atlas/rcecalib/setup/setup_rce.csh
To execute this setup at login the follwing lines should be added to $HOME/.cshrc
if ( -r /reg/g/atlas/rcecalib/setup/setup_rce.csh ) then
source  /reg/g/atlas/rcecalib/setup/setup_rce.csh >& /dev/null
endif
Setup for Bourne-Shell
source  /reg/g/atlas/rcecalib/setup/setup_rce.sh
Or adding the follwing lines to $HOME/.bash_profile
if [ !  -r /reg/g/atlas/rcecalib/setup/setup_rce.sh ]; then
source /reg/g/atlas/rcecalib/setup/setup_rce.sh 2>&1 > /dev/null
fi
Checking out  and setting up the RCE and STControl/PixLib packages into a directory. The setup scripts assume that top RCE release directory is found in $HOME/rce. At CERN these scripts set a new HOME directory on local disk: /reg/lab1/home/$USER. Several release installations should be managed by symbolic links.
[BUILD_HOST] mkdir $HOME/RCE
[BUILD_HOST] cd $HOME/RCE
[BUILD_HOST] cvs co -d rcecalib-CVS-HEAD release
[BUILD_HOST] cd $HOME
[BUILD_HOST] ln -s RCE/rcecalib-CVS-HEAD rce
[BUILD_HOST] cd rce
[BUILD_HOST] cvs co pixlib rce rceapp rceers rceowl rcecalib rceipc rceusr
[BUILD_HOST] cp rcecalib/projects.mk.template projects.mk
[BUILD_HOST} patch -p0 < rcecalib/rce.patch
Building the RCE and StControl/pixlib packages.
Note: the RCE needs to be compiled with the RCE_INTERFACE=1 optionat CERN and SLAC.
[BUILD_HOST] make i386-linux
[BUILD_HOST] make ppc-rtems-rce405-opt RCE_INTERFACE=1
[BUILD_HOST] cd pixlib
[BUILD_HOST] make
  • No labels