Current Status
The Good
sYAG
sYAG checked out - sYAG:LI20:2434. Both motion and light works - controlled on profile monitor panel. The camera is CAMR:LI20:100.
USOTR
USOTR checked out - OTRS:LI20:3158. Ladder edm linked to from Profile Monitor panel will work. Camera is CAMR:LI20:101. LED light is set up on the USOTR channel accessible on the profile monitor edm panel.
IPOTR1
IPOTR1 checked out - OTRS:LI20:3180. Profile Monitor panel needs to be updated. Camera is CAMR:LI20:102. LED light is set up on the IPOTR channel accessible on the profile monitor edm panel however it isn't illuminating the target very well and will be improved.
DSOTR
DSOTR checked out - OTRS:LI20:3206. Profile Monitor panel needs to be updated. Camera is CAMR:LI20:103. LED light is set up on the DSOTR channel accessible on the profile monitor edm panel.
WDSOTR
WDSOTR checked out - OTRS:LI20:3230. Profile Monitor panel needs to be updated. Camera is CAMR:LI20:104. LED light is set up on the IP2A channel accessible on the profile monitor edm panel.
DTOTR2
User control only please... This is on MC01 Ch7 (X) and Ch8 (Y). DTOTR_x: Position 0 is out and 98 is in. DTOTR_y: 108 is YAG. CAMR:LI20:105.
LFOV
User control only please... This is on MC01 Ch6. Position >100 is out and 0 is in. CAMR:LI20:107
PRDMP
This is a fixed phosphor screen, no mover. CAMR:LI20:108.
Oven table mover
Fully checked out. Left with the bypass line in the beam path. Put posts in the way so it won't move out of alignment accidentally. These will remain until MPS is working which will shut off the beam when oven table is in an intermediate state.
The Bad and the Ugly (aka work in progress)
IP Wirescanner 1
Checked out motion but LVDT needs to be set up. Small question over the controls channel to be resolved. PMT3350 and PMT3360 appear offline. Work still needed here.
IP Wirescanner 3
Not checked out. (Note wirescanner #2 is not installed).
IPOTR2 and IPOTR1P
Motion control is all good. Just don't have cameras on these yet. IPOTR2 is controlled on OTRS:LI20:3202 and IPOTR1P is on OTRS:LI20:3175. Cameras currently not needed.