PV Name |
Purpose |
EGU |
Limits |
|
|---|---|---|---|---|
KLYS_LLRF:IN20:RH:LOB_PDES |
Desired Phase used by LOB local feedback |
degrees; absolute |
|
|
KLYS_LLRF:IN20:RH:LOB_P |
Desired Phase for Beam-based feedback only |
degrees; absolute |
none provided- to be calculated by beam-based feedback |
|
KLYS_LLRF:IN20:RH:L0B_PAVG |
actual phase readback (avg of multiple channels): used by beam-based feedback, slc-aware arrys, |
degrees; absolute |
none provided |
|
|
|
|
|
|
KLYS_LLRF:IN20:RH:L0B_ADES |
Desired Amplitude (or Power?) used by LOB local feedback |
volts; absolute |
HOPR, LOPR |
|
KLYS_LLRF:IN20:RH:L0B_A |
Desired amplitude (or Power?) for beam-based feedback only |
volts; absolute |
HOPR, LOPR |
|
KLYS_LLRF:IN20:RH:L0B_AAVG |
actual amplitude readback (avg of multiple channels): used by beam-based feedback, slc-aware arrys, |
volts; absolute |
HOPR, LOPR |
|
|
|
|
|
|
KLYS_LLRF:IN20:RH:G_L0_FB_CTL |
When this in ON, beam-based feedback locks out others from setting L0B_A/P, L0B_ADES/PDES and the local feedback is turned off. Beam-based feedback is responsible for setting this PV ON when starting, setting it OFF when stopping. |
|
|
|
|
|
|
|
|
NOTES
- These PV names and usages are a template for L1S and the BC1 energy beam-based feedback
- TBD: the _A, _ADES, _AAVG may be power, not voltage - may need to use _V, _VDES, _VAVG
RESOLVED:
- The Beam-based feedback takes precidence over local feedback and user inputs. when Beam-based feedback is on, local feedback and user inputs are disabled
UNRESOLVED:
- What to do with Local feedback when there are user inputs (such as correlation plots, etc)?
- TBD: the _A, _ADES, _AAVG may be power, not voltage - may need to use _V, _VDES, _VAVG
- Are all Klystrons and TCAVs to be made available