You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Initial list copied from Jeremy (uneditable):   HPS Data Catalog Meta Data

Variable Format

Variables have the following conventions:

Strings start with 's'.

Numbers which can be integers or decimals start with 'n'.

Timestamps start with 't'.

Variables

General

nRun
nEvents
tRunStart
tRunEnd
nEvents
nEventMin
nEventMax
nFileNumber
  
sDescription
  
sTarget
nBeamCurrent (nA)
nBeamX (mm)
nBeamY (mm)

DAQ CONFIGURATION

ECal FADC

nECALFADC_MODE (1,3,7)
nECALFADC_NPEAK (1,2,3)
nECALFADC_NSA (ns)
nECALFADC_NSB (ns)
nECALFADC_THRESH (ADC)
nECALFADC_W_OFFSET (ns)
nECALFADC_W_WIDTH (ns)

General DAQ

nSSP_W_OFFSET (ns)
nSSP_W_WIDTH (samples)

nSSP_BLOCK_LEVEL (1 or 40)
nSSP_HPS_LATENCY

Trigger

"EN" variables mean "enabled", either 0=no or 1=yes
Cosmic/LED
nSSP_HPS_COSMIC_EN (0,1)
nSSP_HPS_COSMIC_TIMECOINCIDENCE (ns)
nSSP_HPS_LED_EN (0,1)
Pulser
PULSER TRIGGER CONFIGURATION:
nSSP_HPS_PULSER (Hz)
nSSP_HPS_PULSER_EN (0,1)
Physics
There are up to 2 SINGLES and 2 PAIRS triggers. "#" is 0 or 1, designating which one.
SINGLES TRIGGERS CONFIGURATION:
nSSP_HPS_SINGLES_#_EN
nSSP_HPS_SINGLES_EMAX_#_EN
nSSP_HPS_SINGLES_EMIN_#_EN
nSSP_HPS_SINGLES_NMIN_#_EN
nSSP_HPS_SINGLES_NMIN_#
nSSP_HPS_SINGLES_EMAX_# (MeV)
nSSP_HPS_SINGLES_EMIN_# (MeV)


PAIRS TRIGGERS CONFIGURATION:
nSSP_HPS_PAIRS_#_EN
nSSP_HPS_PAIRS_SUMMAX_MIN_#_EN
nSSP_HPS_PAIRS_DIFFMAX_#_EN
nSSP_HPS_PAIRS_ENERGYDIST_#_EN
nSSP_HPS_PAIRS_COPLANARITY_#_EN 
nSSP_HPS_PAIRS_TIMECOINCIDENCE_# (ns)
nSSP_HPS_PAIRS_NMIN_#
nSSP_HPS_PAIRS_EMAX_# (MeV)
nSSP_HPS_PAIRS_EMIN_# (MeV)
nSSP_HPS_PAIRS_DIFFMAX_# (MeV)
nSSP_HPS_PAIRS_SUMMAX_MIN_#_HI (MeV)
nSSP_HPS_PAIRS_SUMMAX_MIN_#_LO (MeV)
nSSP_HPS_PAIRS_ENERGYDIST_#_OFFSET (MeV)
nSSP_HPS_PAIRS_ENERGYDIST_#_SLOPE (MeV/mm)
nSSP_HPS_PAIRS_COPLANARITY_# (deg)
nSSP_HPS_PAIRS_CLUSTERDELAY_# (ns)

OLD List of Metadata Variables

Run and Event Meta Data

tRunStart - run start time

tRunEnd - run end time

tEventStart - earliest event time

tEventEnd - latest event time

nRun - single run number which can be set on all individual files (except for StdHep events)

nEventMin - minimum event number

nEventMax - maximum event number

sRunStatus - run status which could be GOOD, BAD or UNKNOWN (for instance)

nEvents - number of events in the run

 

Physics Event Information

sCollections - list of data collections separated by commas

sDetectorName - name of the lcsim detector model

Beam and Conditions

nBeamEnergy - beam energy in GeV

nBeamCurrent - beam current in nA

nBeamSpotSizeA - major axis

nBeamSpotSizeB - minor axis

nBeamSpotSizePhi - major axis angle w.r.t. x-axis

nMagnetCurrent - (multiple?)

System Status

sSvtOpen - SVT was open or closed

sSvtStatus - status of the SVT (GOOD/BAD/OFF/UNKNOWN)

sEcalStatus - status of the ECAL

sTriggerStatus - status/configuration of the trigger

sTargetStatus - IN/OUT

Raw EVIO Data

sFileNumber - sequential number of the file in the run

LCIO Recon

sReconPass - the recon pass OR the catalog's built-in Version on each file could be used for this

sReconVersion - the Maven tag of HPS Java used to generate the file e.g. "1.2.3"

sRawDataPath - the path to the corresponding raw EVIO data file in the catalog used to generate this file

ROOT DST

sDstMakerVersion - the version of the DST Maker used to create the file; can be read from TClass->GetClassVersion() in ROOT which corresponds to a git tag

sReconDataset - dataset path in the catalog of the corresponding LCIO recon file used to generated this DST file

sCuts - list of cuts used to produce the DST (if any)

StdHep

sEventType - trident, A-prime, backgrounds, etc.

nEventMass - mass of event

nCoupling - A-prime coupling strength

nBeamEnergy - energy of beam

LCIO Simulated Output

sPhysicsLists - name of Geant4 physics list used to generate

sSlicVersion - the SLIC version

sGeantVersion - the Geant4 version

sRandomSeed - random seed used to generate events or 0 if none was explicitly given

  • No labels