Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
All operations are from hpstracker in group C.
Connect the FEB and hybrid(s). Turn on the power to the FEB (see below for instructions). Remember to turn the fan on the FEB.
Start the DAQ:
$ cd /u1/software/software_new
$ source setup_env.csh
$ ./bin/frontEndTestGui
Click <read status> and make sure no error is seen. If so, check that the FEB is powered correctly.
Make sure the AxiXadc temperature is ok (50-60C).
Configure with config/FebConfigHw4.xml
Click <read status> and check that more registers are found.
Go to config and turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).
Click <Write config>.
Do a hard reset under commands/FebCore/HybridHardReset (current on AVDDP should drop ~100mA).
Click <Write config>.
Do a soft reset under commands/FebCore/HybridSoftReset.
Check that the hybrid currents measured are ok.
AVDDP: 5.5V, AVDDN: 5.5V, DVDD: 5.5V and flange power 5.5V (parallel to DVDD).
TBF
TBF