Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Two power supplies crates are being used to power the top and bottom volumes of the Silicon VertexTracker (SVT).
To connect to their interfaces, first login into clon10 from a JLab machine with the user name clasrun:
> ssh clasrun@clon10
In order to obtain the password, talk to an expert!
At this point, the EPICS GUI is started as follows:
> medm -x /usr/local/clas/devel/R3.14.12/support/xycomioc-1.0/medm/svt_trips.adl
In the case where the operation of the power supplies can not be done through EPICS, each power supply can be accessed directly through a terminal. After login into clon10 (see above), the command
> tsconnect hpshv1
will bring up the display for the power supply powering the top SVT volume and
> tsconnect hpshv2
will bring up the display for the power supply powering the bottom volume. After each of the terminal interfaces come up, hitting N (next) will refresh the window. It will also allow you to navigate between screens
The following table provides a map from a power supply channel # to a physical location on the SVT: