Page History
Average amplitude and RMS over pads for some of runs from the range 898-914
run 898 dark rate:
run 898 att=0.1
run 902 att=0.005
run 909 att=1 low gain
CSpad images for runs 898-914
Bad pixel map
run 898 dark rate for high gain mode; plor shows the dark rate difference between low and high gain r898-907
run 899 att=0.1 (dark rate is subtracted using r898)
run 900 att=0.02 (dark rate is subtracted using r898)
run 901 att=0.002 (dark rate is subtracted using r898)
run 902 att=0.005 (dark rate is subtracted using r898)
run 903 att=0.005 low gain (dark rate is subtracted using r907)
run 904 att=0.1 low gain (dark rate is subtracted using r907)
run 905 att=0.5 low gain (dark rate is subtracted using r907)
run 906 att=1 low gain (dark rate is subtracted using r907)
run 907 dark image for low gain
run 908 dark image for low gain (dark rate is subtracted using r907) Difference between two dark rate images
run 909 att=1 low gain (dark rate is subtracted using r907)
run 910 att=1 low gain (dark rate is subtracted using r907)
run 911 att=1 low gain (dark rate is subtracted using r907) Detector is moved for few mm
run 912 att=0.1 low gain (dark rate is subtracted using r907)
run 913 att=0.1 low gain with wires (dark rate is subtracted using r907)
run 914 att=0.1 low gain with wires (dark rate is subtracted using r907)
<- NON tilted 2x1 Tilted 2x1-> 
Manipulation with images
Difference between runs 904(before move) - 912(moved), both runs att = 0.1
Overview
Content Tools