...
While we were all at SLAC, we had a meeting concerning the work to be done on the ACD software.THIS IS A WORK IN PROGRESS - COME BACK LATER!!!
The priorities where assigned are: H = High, M = Medium, L = Low, where H in general means before DC2.
Geometry
Activity | Description | Priority |
---|---|---|
Overlaps | Crown. This also include overlaps of side tiles, which is dependent on shingling | M |
Screws | The description for screws is already available, needs more testing | L |
Curved top tiles | As agreed with ACD team, this will be implemented as an extra squared off piece | M |
Shingling | Probably the most difficult update to the model | M |
Check side tile edge wrt Si | Should talk to Leon | H |
As Built Gaps | Is this possible before positon maps are available? | H |
Blanket-MMS | Dave Thompson has provided up to date details | H |
flexures | Need to consult with Alex to see if this is important | |
weighing support material | need to consult with Alex to see if this is important | |
BEA | need to consult with Alex to see if this is important |
...
Activity | Description | Priority | |
---|---|---|---|
Ribbon Attenuation | Alex has provided mean PE per MIP based on position along ribbon. | L | |
Fiber Attenuation | Alex provided a table before the AcdGeo simulations. | DONE | |
Check/Improve Edge Effects |
| H | |
Noise | Check the current std deviations | ||
Overlays | what is this??? |
|
|
"Hit map" vs "Accept map" |
|
| |
Range |
|
| |
Left&Right Factor of 2 Check | A quick fix was inserted in the code to fix the factor of two, need to check to be sure there are no further instances. | H | |
CNO | Check handling from beginning to end. | ||
readout limitations | i.e. an event causes 89 tiles to fire, but only 10 are read out - need to check to see what the default is |
...
Activity | Description | Priority |
---|---|---|
Use of PHA | Calculating reconstructed ACD energy per tile | H |
New Variables in merit | Introduce Eric's new TkrIntersect Quantities into the ntuple. | H |
Normalize Energy Deposition by Angle |
| M |
Distances in tracking sigmas | Eric's new TkrIntersect code using the propagator should make this easy | M |
AcdMaxTileE | Variable used by Steve to help eliminate S/C events. | H |
Store both MC Enery dep AND Recon Energy | Currently only MC Energy Deposited is stored. | H |
Angle beween recon track and tile plane | Requested by Alex. Easily obtainable from Eric's TkrIntersect code? | H |
Alex has requested we be sure to include AcdActiveDist in X and Y as soon as possible - this should be taken care of by Eric's new TkrIntersect calculations.