| Description | Priority | Assigned to | Design | Tested | Notes |
|---|
- Analog board power supplies not powering up.
| High | Scott/Dionisio | Done |
| The missing connection on the power planes have been identified by Scott and implemented in the C01 design files. A new board spin is required. |
| Medium | Dionisio/Tung |
|
| Need to change the fab notes to make board more flexible. If needed we will change the planes from solid to criss-cross pattern |
- Carrier board copper plate opening is too narrow
| Medium | Marco | Done | Done | Marco has changed the design file to increase the opening and requested the tech to rework all existing copper carriers |
- Component heights to not match pockets in the cooling block
| Medium | Marco |
|
| Scott found some components hight did not match the needs. Marco is working with Don to get this fixed |
- Mounting holes on cooling block have wrong size
| High | Marco |
|
| Mounting hole on the cooling block are larger than in the board. This prevents us from securing the boards. |
- Mounting holes on cooling block have wrong size
| Medium | Dawood |
|
| Initialization files only work if the project (python ./devGui.py) is executed in the script folder. How can we make it more consistent and enable the project to be ran from other locations |
| Medium | Dawood |
|
| We need to enable the configuration files to be done for all asics individually |
|
|
|
|
|
|
