...

The configuration is only done on one node.  But we can make sure that the configuration object is present on all the relevant nodes (and in the associated xtc file).

Schedule

(on Dec. 19, 2022) Sometime in February/March a prototype with 3 tiles will be released (could generate fake data for missing panels for 1 quad).  Full detector: summer?

...

Do I understand correctly we would need 48/8=6 kcu cards to to convert all of them?  That will require a larger node.
12:18
I’m also worried because I had significant problems with lane-locking with the converter-card for the epix100.  I had to mix-and-match lanes to find one that locked.  Optical powers looked good.  If we really need to do this conversion we should probably use that converter card to understand the lane locking problems.  Maybe I needed to clean all the fibers somehow, even though the optical powers looked good?

Fiber Lane Assignments

(Tentative)Preliminary, from Dionisio

Lane[0].VC[0] = Data[0]
Lane[1].VC[0] = Data[1]
Lane[2].VC[0] = Data[2]
Lane[3].VC[0] = Data[3]
Lane[4].VC[0] = Data[4]
Lane[5].VC[0] = SRPv3
Lane[5].VC[1] = XVC
Lane[6].VC[3:0] = slow monitoring[3:0]
Lane[7].VC[3:0] = o-scope[3:0]
Lane[10:8] = Reserved for edgeML
Lane[11] = LCLS-II Timing

...