Setup for reading the ITkPixV1 quad module with YARR
Physical components:
The module
Power adapter
There are a few different types of data adapters. This is the one where all 4 chips are read through one DP adapter, so you'll need to use the 16x1 configuration in both software and firmware (you can check the firmware with ./bin/specComTest, and reflash the firmware if needed)
Power supply. Set to 2V (possibly more depending on loss in the wires) and 6.1A (1.526A per chip)
...
Setup for reading the ITkPixV1 quad module with YARR + type0 ring + pp0
Use the special ITkPix → type0 ring flex from Steven (not the one for RD53A)
...