Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The layout of the primary optics

This new compressor overhaul, the time tool overhaul, and the new standard configurations were included in the 2022 PEMP goal effort. The goal of the compressor overhaul project is to improve the performance and operability of the short pulse compressor. The new compressor features are listed below:

  • Remote controls of grating angle: in the new system, we installed two rotation motors (URS75BPPV6) for both gratings (Fig1: G1 & G2) to replace the manual controlled rotation stage. We also use the encoded LTA to replace the original translation stage on G2 which was not encoded. With all remote-control capabilities, we will implement an in-situ autocorrelator for an auto-optimization procedure (Fig.2), which can be operated with python script.
  • Input/output pointing control: in the new system, we have two cameras looking at two input reference points. We have two mirrors prior to the compressor chamber for adjustment. We also have two cameras (Fig. 2 near field and far field) looking at compressor output. We have three motorized output mirrors (M1, M2, and M3)for adjustment.
  • Compact mounts: in the new system, we use the 5” in-house designed mirror mounts to replace the 6” ones with lots of disadvantages. We also use compact TRA6 motors to replace LTA motors (cumbersome as pointing motors).
  • Decouple time-tool: in the old system, the time tool beam was leaking through the compressed beam. It created complexity for both alignment and operation. In the new system, time-tool beam is decoupled from this line.
  • Upgrading the grating mounts: the grating mounts are redesigned with better stability and compactness.

Image Added

Figure 1. the new layout design: the beam impinge upon the first diffraction grating immediately after entering the vacuum window, from which the beam pointing can be monitored. There are three motorized mirrors M1, M2, and M3 after the fourth bounce of the grating pair G1 and G2 to provide full pointing control prior to propagating into the target chamber.

Layout of diagnostics



Cool stuffImage Added

Performance data

  • TiPA measurement
    • sweet figure
    • Image Added
  • SSA measurement
    • sweet figure
  • SPIDER measurement
    • sweet figure

...