...
URS150 rotational stage reference but will stall on move. The UTS150 linear stage now works using "default" settings. A lot of time was spent between Christian, Eric, and Nick understanding connection and pin layout flipping throughout the cable routing from controller to stage.
The URS150 rotational stage will be replaced.
XTCS Filter Wheel
Update 30 July 2022: This is working. The following information is being for reference:
A new air-side DB15 to MForce cable was fabricated and installed today. Instead of a new IOC this device was connected to the user dumb motor patch panel and set up using the "XUV Filter Position" configuration.
...
- replacement for GIGE4
- replaced with GIGE8, known on camViewer and MEC screens as the beamline camera XRay_Imaging.
- needs mounting.
Motors:
...
- XTCS
- Newport rotational stage"Dumb" filter wheel
Items originally listed but will be needed later for X523
...