Page History

...

1. Send an email to whoever created the calibration files and cc the data monitor list (datamonlist@glast2datamonlist@glast4.stanford.edu) to let them know when the calibration should take effect.

   1. Get the ID of the next run by using XTime or similar tool to convert start time of the next run after the SAA pass into MET.

   2. Include the start time and first run in the email, e.g., "vstart is 2018-09-28 03:43. First run should be 559799706."
2. Update the JIRA issue with the same information. 
3. Later check that the new calibration has been used.
   

   1. Go to data processing page and click on the L1Proc bar for the run after the change should have happened.

   2. Go to the "Substreams" table in the middle of the page and click on one of the streams for the "doChunk" task.
   3. Go down to the "Substreams" table and click on any one of the "doCrumb" streams.
   4. Click on the log file link for the "recon" process.
   5. Search in the log for appropriate XML file(s).
4. Assuming everything is good, update and close the JIRA issue.

...