...
- Open mechome, go to the tab "User Devices", open the panel "User Sentry PDU"
- Turn On "Roughing pump PTM 02 (turbo 2)"
- Wait until SEW:GPI:04 drops below 1.0e-02 torr
- Press OPN on SEW-VGC-15
- Press RUN next to the turbo pump logo
- Wait until turbo pump displays "Full Speed"
Version v1.01
Version | Release date | Description |
---|---|---|
v1.00 |
| Demonstration version |
v1.01 |
| Simplification of the procedure using only checklists |