Page History
...
This means the job failed somewhere. Open the log files and look if one of the following cases apply:
- The most common case is that there is a typo or syntax in the config file. In this case, the log file should be very short, directly pointing at the section in the config file that has issue. As often with typo or syntax errors in python, the error is not always at the exact line mention in the error.
Check that the filters do not filter out all the pulses. In the current state, if all shots are being filtered, the job will just hang forever. This can easily spotted by looking for the following section in the log file:
Code Block language bash theme RDark did not select any event, quit now! getFilter: Cut 0.500000 < evr/code_94 < 1.500000 passes 0 events of 11252, total passes up to now: 0 getFilter: Cut 24.464119 < scan/diag_x < 24.496000 passes 11252 events of 11252, total passes up to now: 0 getFilter: Cut 0.500000 < damage/jungfrau1M < 1.500000 passes 11252 events of 11252, total passes up to now: 0
...
Overview
Content Tools