Page History

...

• constants for ueddaq02 r401 are loaded correctly from the latest dark run r398
• default gain factor for FL is 0.164 ADU/keV (or ~6keV~6 keV/ADU)
• numeration of panels is defined in geometry looks correct
• per-pixel gain range index is defined correctly =2 for FL.
• pedestal subtraction works as expected: raw-peds has mean=0.6 ADU, raw RMS shrinks from 170 ADU to ~3 ADU raw-peds.
• there may be a minor common mode offset ~0.6ADU, but common mode is not corrected for FL. Even if it is corrected, this would not resolve this issue.
• default gain factor is defined correctly for FL is 0.164 ADU/keV
• rms defined in dark r398 shows that panel/banks have significant spread/noise variation of factor 2-3 between panels.
• plots of calib for "hot" and "cold" ASICs show that RMS is significantly different. 
• in this case application of the common threshold is a bad idea

...