Page History

...

bash
sconda
crogue
sdk
cd $SSVT
cd heavy-photon-daq/software/scripts/
source resetDataDpmresetDataDpms.sh

3) In the terminal in which Rogue had been running, execute "cob_dump --all atca1
In the resulting print-out, look for all codes to be 0xea. If they do not all go
to 0xea, then execute cob_cold_reset atca1 and then cob_rce_reset atca1.

...

• If some FEBs show red values of voltages / currents it's likely they lost clock. Power-cycle those FEBs only.
  • Turn off the Febs DIGI, ANAP and ANAN
  • When OFF, turn up DIGI and wait until it comes to ~1V ~1A (Additionally some output will be shown in the terminal where Rogue process is running, confirming that communication is established)
  • When DIGI is UP and connection to Rogue is established, turn on ANAP and ANAN
• If all FEBs are green proceed with (7)

...