Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
...
FEB | FEB SN | Flange Board (HW) | Flange Channel | I At Boot (AnaN, AnaP, Digi) | I Mod ON | I Mod ON + Config | Ctrl Ch (dpm / ch) (1 is top cob) | Fiber (ctrl / Data) | jTag OK | Feb Address | Data Taking | Comment |
---|---|---|---|---|---|---|---|---|---|---|---|---|
L0-1t | 12 | 2 | 2 | 0.242 - 1.212 - 1.250 | 0.292 - 2.317 - 1.392 | 0.292 - 2.833 - 1.322 | 0 / 3 | C / G | Y | 0 | OK | Lost clock after few hrs up |
L2-3t | 17 | 3 | 0 | 0.256 - 1.248 - 1.239 | 0.317 - 2.319 - 1.314 | 0.313 - 3.112 - 1.313 | 0 / 8 | D / H | Y | 2 | OK | |
L5t | 05 | 0 | 0 | 0.236 - 1.216 - 1.287 | 0.272 - 2.101 - 1.334 | 0.271 - 2.715 - 1.334 | 1 / 5 | A / E | Y | 6 | OK | Lost clock after few hrs up. Also lost clock at the transition between download and prestart |
L6t | 16 | 0 | 1 | 0.249 - 1.222 - 1.362 | 0.313 - 2.743 - 1.434 | 0.308 - 3.539 - 1.434 | 1 / 4 | A / E | Y | 8 | OK | Lost clock during download. |
L4b ( In EPICS is L4t) | 08 | 0 (??) | 2 (??) | 0.248 - 1.241 - 1.248 | 0 / 4 | C / G | Y | 5 | OK | Only 2 HV pins on one hybrid (instead of 4) | ||
L4t ( In EPICS is L4b) | 11 | 1 | 0 | 0.252 1.153 1.374 | 0.307 - 2.8755 - 1.448 | 0.304 - 3.564 - 1.449 | 1 / 8 | B / F | Y | 4 | OK | |
L5b | 20 | 1 | 1 | 0.246 - 1.169 - 1.243 | 0.306 - 2.242 - 1.346 | 0.302 - 3.063 - 1.321 | 1 / 7 | B / F | Y | 7 | OK | |
L6b | 04 | 1 | 2 | 0.248-1.199-1.278 | 0.307 - 2.705 -1.345 | 0.304 - 3.525 - 1.348 | 1 / 6 | B / F | Y | 9 | OK | |
L0-1b | 07 | 2 | 0 | 0.241 - 1.284 - 1.313 | 0.293 - 2.235 - 1.394 | 0.293 - 2.931 - 1.394 | 0 / 5 | C / G | Y | 1 | OK | |
L2-3b | 01 | 3 | 1 | 0.220 - 1.330 - 1.388 | 0.311 - 2.452 - 1.456 | 0.305 - 3.286 - 1.456 | 0 / 7 | D / H | Y | 3 | OK |
This table shows a visual of the connections from the cooling plate to the flange, looking from the detector toward the flange. X indicates no connection.
Flange Board Number | ||||
---|---|---|---|---|
3 | 2 | 1 | 0 | |
FEB | L23T | L1B | L4T | L5T |
L23B | X | L5B | L6T | |
X | L1T | L6B | L4B | |
List of issues we observed during local data taking relative to the Back - End.
NOTICE!!! The dpm numbers in the daq map after 7 are off by one. Example: DataDpm[13] in the DAQ Map is hostname dpm14.
...
...
Code Block |
---|
python SvtCodaDummy.py --local --env JLAB |
Here are the instructions to how to start Coda with clasrun user
Code Block |
---|
python SvtCodaDummy.py --local --env JLAB 1) Open a terminal on clonfarm1 > bash > sconda #setup conda > crogue #activates rogue environment > startCodaRun #starts Rogue Coda Run Gui 2) Open a terminal on clon10new > bash > sconda; crogue; startCodaDummy #starts the dummy rogue server 3) Open a terminal on clonfarm1 > runcontrol -rocs Then: connectconfigure (hdice1_clonfarm1_clon10new to run with both cobs, hdice1_clonfarm1 to run with top cob, hdice1_clon10new to run with bottom cob)download (for both cobs use hps_v2_noThr.trg)PrestartGo |
We are using conda release 1.4.0, installed in
...
Code Block |
---|
sh /data/hps/slac_svt/copy_libraries.sh |
Error:
setHeartError: 0 >sys 0, mask 21<
WARN: HeartBeat[0]: heartbeat=1628785839(1628785839) heartmask=21
UDP_cancel: cancel >inf:clonfarm1 sys 0, mask 21<
UDP_cancel: cancel >inf:clonfarm1 sys 0, mask 21<
TcpServer(external): wait: request in progress
Effect:
rol BUSY
Causes: multiple. Suggest to add printouts around rogueCodaTrigger and rogueCodaEvent in the hpssvt1.c ROL
This is in the event builder and indicates that we are dropping packets.
This is raised in RssiContributor.cc in the event_builder by acceptFrame thread
Effect:
rol BUSY
Causes: Dropped frames.
Fix: Reset COBs
This usually indicates that the FEBs lost clock
Effect: not possible to run
Causes: FEBs lost clock
Fix: Recycle FEBs and run control