Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Module IDStereo (Half-Module ID)Axial (Half-Module ID)2014 GoodnessRe-TestedGoodness (stereo/axial)Re-MountedAssignment
0419bad channels in middle APVs5/11/19 (CB)good/A hybrid flaky

71514bad channels in APV furthest from beam/perfect5/11/19 (CB)good/goodyes7B
8113bad channels on both edges/bad channels in 2 APVs furthest from beam5/11/19 (CB)good/B hybrid flaky sync

394perfect

yes7T
156perfect

untouched5B
278perfect5/10/19 (CB)
untouched6B
423perfect5/10/19 (CB)
untouched5T
51011perfect5/10/19 (CB)
untouched6T

broken sensor

hole side (not broken)

N/AN/AN/A8/12/21 (AS)

looks OKAY

noise/adcs




broken sensor 

slot side (broken)

N/AN/AN/A8/12/21 (AS)

Some hybrid channels

seem damaged

noise/adcs



Hybrid 100N/AN/AN/A8/12/21 (AS)

One high noise channel

adcs



Hybrid 101N/AN/AN/A8/12/21 (AS)

One high noise channel

adcs



Half-Module IDGoodness (Hole)Goodness (Slot)AssignmentNotes
AlphaBad APV

Originally Module 0, axial
Gamma0/5 APV sync. Pos clock noisy, No clock on CLK_N. Will replace clock fanout

4/5 APV sync

Otherwise looks okay


Trying to recover hole side


Module 3 was removed from 6B and the module 0 stereo half-module was mounted to module 3 axial by Tim in the hps alcove. Module 3 was not re-tested before going into 6T.

...